Sansuisha(Thailand) Co.,Ltd.(STC)

STC was established as a local subsidiary in 2010 when the Kubota Corporation advanced to Thailand.
In 2011, the STC operation began with coating and painting farm machinery parts. From there, a sheet metal fabrication facility was installed, and STC began manufacturing operations for farm machinery parts.

Factory Summary

Established May 4, 2010
Address AMATA CITY CHONBURI 700/928 Moo6, T. Nongtamlung, A. Panthong, Chonburi 20160 Thailand
TEL +66-3818-5333
FAX +66-3818-5335
Site Area 30,372㎡
((Factory Area 1: 7,078 m2, Factory Area 2: 7,115 m2, Canopy Area: 4,884 m2)

Production Facilities Coating Facilities

A line
Preprocessing Phosphoric acid and zinc treatment
Coating booth
  • Push-pull method, no-pump booth
    (2 base coat machines, 2 final coat machines)
  • Correction lifter (base coat 2 machines, final coat 2 machines)
Automatic coating machine
  • Fairing turbo No 2 disk electrostatic automatic coating system
  • Ransburg (base coat 1 machine, final coat 1 machine)
Drying furnace
  • 1 Draining drying furnace hot air circulation
  • 1 Base coat drying furnace hot air circulation
  • 1 Final coat drying furnace hot air circulation
Available size H2,400㎜ × W1,200㎜ × L1,200㎜
Maximum weight 60 kg / hanger

Fairing turbo No 2 disk electrostatic automatic coating system

B line
Preprocessing Phosphoric acid and zinc treatment, shot blasting
Coating booth Push-pull method, no-pump booth
(3 base coat machines, 3 final coat machines)
Automatic coating machine
  • Auto REA-90 ratchet gun automatic electrostatic applicator
  • Ransburg 1 reciprocating engine, 4 guns
    (1 base coat machine, 1 final coat machine)
Drying furnace
  • 1 Draining drying furnace hot air circulation
  • 1 Final coat drying furnace hot air circulation
Available size H1,300㎜ × W600㎜ × L600㎜
Maximum weight 60 kg / hanger

Auto REA-90 ratchet gun automatic electrostatic applicator

Production Facilities Sheet Metal Facilities

Shearing 1 unit
AMADA DCT-2565
Turret Punch Press 2 unit
AMADA EM2510NT (20 t)
AMADA EM2510MⅡ (20 t)
Press Brake 2 units
AMADA HDS1303NT (130 t)
AMADA FMB3613G-NT (36 t)
Spot Welding Machine 4 units
AMADA TS III table welding
AMADA ID40 III fixed welding
DAIHEN Nut Feeder Welding
NADEX X gun
Semi-Automatic Welding Machine 7 units
DAIHEN product
Mold Polishing Machine 1 unit
AMADA TOGU III
Inspection Equipment 1 unit
FARO 3 dimensional measuring instrument

Turret Punch Press

Access